Step Symptom Possible Cause Actions / Verifications
1. If the critical information was displayed
after the troubleshooting, then the
replacing is complete.
2. If the symptom still exists, then go to
Action 2.
Action 2
1. Logout from the web console.
2. Login to it again.
Verification 2
1. If the critical information was displayed
after the troubleshooting, then the
replacing is complete.
2. If the symptom still exists, then go to step
4
4 - Management
module or other
components
Action 1
1. Contact with Hitachi Data Systems technical
support. See the Getting help section in this
manual.
Troubleshooting
11-13
Hitachi Compute Blade 500 Series System Service Manual
To Next Page
Loading...
