RAIL KIT ASSEMBLY RAIL KIT ASSEMBLY
3-4
2. Install the inner rail onto the chassis.
3. Secure the screws on the end of inner rails for safety concern.
Figure 3-2. Installing the Inner Rail onto the Chassis
4. Press the latch and align the outer rail with the rack cabinet.
5. Release the latch to lock in place.
Figure 3-3. Securing the Outer Rail to the Rack Cabinet
6. Repeat for the remaining side.
Once the rails are installed properly, you can install a system in the rack cabinet.
Click!
Click!
To Next Page
Loading...
