RAIL KIT ASSEMBLY RAIL KIT ASSEMBLY
3-3
Rack Installation Overview
Review thoroughly the documentation that is included with the rack cabinet for safety
and cabling instructions. Before installing the rails in the rack cabinet, review the following
guidelines:
Plan the rail installation starting at the bottom of the rack cabinet.
Remove the rack doors and side panels to provide easier access during installation.
Always adhere to safe practices when lifting or moving components.
Inspect all equipment before installing on the rack cabinet. Replace any defective
equipment.
Installing the Rails
1. Press and remove the inner rail.
Figure 3-1. Removing the Inner Rail
IF YOU ARE INSTALLING MORE THAN ONE SYSTEM, INSTALL THE FIRST SYSTEM IN THE LOWEST AVAILABLE POSI-
TION IN THE RACK CABINET.
To Next Page
Loading...
