Hitachi GR2000 Series - Chapter 3 - Component Details; Rmp (2 S)

Component Details
GR2K-GA-1002 3-5
Rev. 6.03
3.3.2 RMP (2S)
The RMP is for GR2000-2S and physically appears as Figure 3-6.
The RMP has one CONSOLE (RS232C) port and four 10BASE-T/100BASE-TX ports.
Table 3-4 and Table 3-5 show the connector specifications on these ports.
Figure 3-6 RMP Front Panel View
STATUS(RM)
POWER READY
ALARM
ERROR
POST DISP
STATUS
STATUS(RP)
STATUS(NIF2)




MEMCARD 0
MEMCARD 1
RMP
LNK/ACT :G
LINE ERR :Y T/R
CONSOLE
ACCESS 1
ACCESS 0
RESET
TEST
/
1
00BASE-TX

LINE3
LINE2
LINE1 LINE0
(RS232C) LAMP
NIF2