Hitachi GR2000 Series - Input Power Requirements

5.2.1 Input Power Requirements
The input power supplied to the GR2000 series models must meet the requirements
in Table 5-3 for AC input or those in Table 5-4 for DC input.
Table 5-3 Input Power Requirements—AC Input
Router Model Input Voltage Phase Frequency (Hz) Waveform
Distortion (%)
Electrical Noise
GR2000-2S 100 Vac ±10 % Single 50/60 ±1 10 or less Must not be
included.
GR2000-4S 100 Vac ±10 % Single 50/60 ±1
GR2000-6H 100 Vac ±10 % Single 50/60 ±1
GR2000-10H 100 Vac ±10 % Single 50/60 ±1
200 Vac ±10 % Single 50/60 ±1
GR2000-20H 200 Vac ±10 % Single 50/60 ±1
GR2000-4 100 Vac ±10 V Single 50/60 ±1
200 Vac ±20 V Single 50/60 ±1