To add or remove the fans to/from each model of GR2000 other than GR2000-2S,
refer to the following subsections.
8.4.1 Addition/Removal of Main Memory Module for RM (BCU)
To add or remove the main memory module for RM (BCU), follow the instructions
illustrated in Figure 8-16.
*
Note: The main memory modules of GR2000-2S cannot be added or removed by the
user because RM-CPU and RMP of GR2000-2S are integral to chassis. When
addition or removal of main memory module is necessitated on GR2000-2S,
entrust work to trained service personnel.
Main Memory
Installed connector
To Next Page
Loading...
