ine state
indication in M
and browse
-- -- (*3) -- -- -- Being
initialized.
Being initialized (3). initialize
G--(*3) --Being
operated
In normal
operation.
In standby (3). active up
-- Y (*3) Y Y Line fault being
occurred.
In operation (line fault
being occurred (8).
active down
G -- (*3) Line test. Line being tested (9). test
G -- (*3) Y In loop upon
request from
counterpart.
In loop upon request
from counterpart (12).
looped by rem
-- -- -- In fault. In fault (4). fault
-- -- -- Command
being blocked.
In maintenance (10). closed
-- -- -- -- -- -- Not used. Configuration
definition not
set yet
Not used.
Configuration
definition not set yet.
(10)
unused
-- -- -- Configuration Configuration mismatch
To Next Page
Loading...
