Act
(*1)
LINE
ERR
(*1)
T/R
(*1)
RAI
(*1)
LOS
(*1)
LOOP
(*1)
Line state Detail of state
Stateasseenby
SXMP
Line state
indication in MMI
and browser
-- -- (*3) -- -- -- Being
initialized.
Being initialized (3). initialize
G--(*3)YY--Being
operated
In normal
operation.
In standby (3). active up
-- Y (*3) Line fault being
occurred.
In operation (line fault
being occurred (8).
active down
G -- (*3) Line test. Line being tested (9). test
-- -- -- In fault. In fault (4). fault
-- -- -- Command
being blocked.
In maintenance (10). closed
-- -- -- -- -- -- Not used. Configuration
definition not
set yet
Not used.
Configuration
definition not set yet.
(10)
unused
-- -- -- Configuration
definitions not
agreed.
Configuration
definitions not
agreed. (11)
mismatch
(*1): G: Lights in green, Y: Lights in yellow, -: Goes off
To Next Page
Loading...
