Hitachi SVP F 00 Series - Hyper-Threading; Configuring the Virtual SVP

SVP Guest OS (maximum one DK
C per SVP guest OS)
■
Two virtual CPUs
■
One virtual network adapter
■
4 GB RAM
■
120 GB disk space
■
One of the following 64-bit operating systems:
●
For VMware ESXi 6.0.0: Windows 7 Professional (64-bit)
●
For VMware ESXi 6.0 U2: Windows 7 Professional Service Pack 1 (64-bit)
Miscellaneous
■
WinZip
Hyper-threading
To support a virtual SVP, verify that hyper-threading is active for the ESXi server and VM
guest host.
Note: Hyper-thr
eading is enabled by default.
Configuring the virtual SVP
After pr
eparing the environment, activating hyper-threading on both the ESXi server and
VM guest host, and verifying the conguration layout, use the following procedure to
congure the virtual SVP.
Procedure
1. Create a Windows 7 Professional x64 Service Pack 1 on the ESXi host.
2. Verify the virtual network connection is properly assigned to the appropriate virtual
machine network.
Hyper-threading
Chapter 7: Installing the SVP software on a VMware ESXi host
Service Processor Technical Reference 109