Hitachi SVP F 00 Series - Default IP Address Settings

Default IP address settings
The physical SVP is pr
e-congured with a default IP addresses and bridge the LAN 1/3/4.
The user connects to the SVP using the IP address 192.168.0.15 for LAN1/3/4 ports
(management) or 10.0.0.100 for LAN2 port (maintenance), respectively.
Port Name of NIC
(user can change
a NIC name)
Connected
to
Default IP
addr
ess
IP address
after bridge
is
congured
Notes
LAN
1
Management
(User)
Management
LAN
N/A (DHCP) 192.168.0.15
/24
Part of
bridge. IST
uses
LAN1/3/4 or 2
ports for
Remote
Desktop
Protocol
(RDP).
LAN
2
Maintenance MPC or User
PC
10.0.0.100/2
4
<-- Not a part of
bridge. IST
uses
LAN1/3/4 or 2
ports for RDP.
LAN
3
Management
(CTL1)
DKC CTL1 N/A (DHCP) 192.168.0.15
/24
Part of the
bridge.
LAN
4
Management
(CTL2)
DKC CTL2 N/A (DHCP) 192.168.0.15
/24
Part of the
bridge.
IPMI N/A User PC N/A
(disabled)
<-- Not
supported
(user's
discretion)
Default IP address settings
Chapter 4: Installing the Hitachi Vantara-supplied SVP
Service Processor Technical Reference 28