15. Click OK to apply the settings and close the Local Ar
ea Connection Properties
window.
16. Close the Network Connections window.
Installing Hitachi Device Manager - Storage Navigator
The procedure for installing the Device Manager - Storage Navigator software takes
approximately 10 minutes.
Procedure
1. Connect a PC to the LAN2 port on the SVP.
2. Insert the attached SVP rmware media into the PC's CD drive or DVD drive.
3. On the root folder of the SVP rmware media, right-click Setup.exe, and then click
Execute as Administrator.
4. In the Choose Setup Language window, click a language, and then click Next.
Installing Hitachi Device Manager - Storage Navigator
Chapter 19: Replacing the Hitachi Vantara-supplied SVP
Service Processor Technical Reference 266