Hitachi SVP F 00 Series - Configuring the Troubleshooting Settings

Configuring the troubleshooting settings
The Windows Computer Maintenance setting must be disabled.
Procedure
1. Click Control Panel > Troubleshooting, and then click Change settings.
2. In the Change settings windo
w, for Computer Maintenance, click O, and clear all
conguration options below Other settings.
3. Click OK, and then close the windo
w.
Note: After conguring the tr
oubleshooting settings, congure the
Remote Desktop settings.
Conguring the tr
oubleshooting settings
Chapter 5: Installing the SVP software on a customer-supplied server
Service Processor Technical Reference 61