Hitachi SVP F 00 Series - Configuring the Control Panel Display; Configuring the Desktop

Configuring the Control Panel display
Procedure
1. Open the Control Panel.
2. From the View by list, select Large icons.
Note: After conguring the contr
ol panel display, congure the desktop.
Configuring the desktop
Congure the Windows screen saver function on the SVP.
Procedure
1. Click Control Panel > Personalization. For Basic and High Contrast Themes (6),
click Windows Classic.
2. Click Scr
een saver.
3. In Screen saver, click Blank, and then set Wait to 60 (minutes).
4. Click OK.
Conguring the Contr
ol Panel display
Chapter 5: Installing the SVP software on a customer-supplied server
Service Processor Technical Reference 46