Hitachi SVP F 00 Series - Physical SVP LAN Port Assignment

The following gur
e shows a physical SVP in non-bridged environment.
For information about conguring an SVP for a non-bridged network envir
onment, see
Operating the physical SVP in a non-bridged network conguration (on page 35) .
Ph
ysical SVP LAN port assignment
The LAN port assignments on the physical SVP should match the ones in the following
gure.
The IPMI port is an IPMI-dedicated port connected to the BMC in the SVP and is invisible
from the Windows operating system. For security reasons, the IPMI port cannot be
enabled in BIOS setting and is not supported for the SVP.
Physical SVP LAN port assignment
Chapter 4: Installing the Hitachi Vantara-supplied SVP
Service Processor Technical Reference 27