3. In the left pane of the Add Roles and Featur
es Wizard window, click Hyper-V >
Virtual Switches. Then check the appropriate Ethernet controller.
4. Accept the default Hyper-V
> Default Stores locations for storing les. If you need
to change the locations later, do so by using the Hyper-V settings.
Installing the SVP software on a guest OS
After you perform the host congur
ation, install the SVP software on a guest OS.
You install the SVP software using Hitachi Device Manager - Storage Navigator.
Procedure
1. Double-click the Setup.exe le for Device Manager - Storage Navigator.
2. When prompted, select a language and accept the license agreement.
Installing the SVP software on a guest OS
Chapter 8: Installing the SVP software on a Microsoft Hyper-V Server 2012 R2 Virtual Machine
Service Processor Technical Reference 171
To Next Page
Loading...
