Hitachi SVP F 00 Series - Physical SVP (Windows 7) Environmental Specifications

Item Specification
■
Eur
ope/CE Mark
■
EN 60950/IEC 60950-Compliant
MFT p-code Description watts
MBD-X10SLM+-LN4F-O Single-socket H3 (LGA
1150) / 32-GB DDR3
EC
C 1600 MHz / 6x
SATA / 4x GbE
20 W
CSE-512F-350B Two 350 W 3.5-inch
internal drive bays
26.4 W
CM8064601483405 Intel Celeron G1820 2.7
Ghz 2M tray
53 W
0F11000 3.5-inch 25.4 mm 2 TB
32 MB 7200 RPM
9.1 W
KVR16E11S8 4 GB 1600 Mhz DIMM
SR x8 with TS Kingston
F
4.05 W
Total 112.55 W
VA is 140.69, with a 0.8 power factor.
Note: The measur
ements are not kilo values.
Physical SVP (Windows 7) environmental specifications
The following table lists the environmental specications for the physical SVP supplied by
Hitachi Vantara.
Item Specication
Operating temperature 41°F ~ 95°F
(5°C ~ 35°C)
Non-operating temperature range -40°F ~ 140°F
Physical SVP (Windows 7) environmental specications
Chapter 2: Physical SVP (Windows 7) hardware description
Service Processor Technical Reference 20