The Stop Service scr
een opens.
2. Click Conrm.
Note: T
o resume service, in the Storage Device List window, click Start
Service of the storage system where you want to start the service.
Upgrading the SVP software only
This pr
ocedure describes how to upgrade the SVP software, without upgrading the
storage management software and storage system rmware. This procedure can be
used with storage systems that have rmware version 83-01-21 or later.
This procedure assumes that the storage system is operating and that a console PC is
connected to the SVP using Remote Desktop Client.
Upgrading the SVP software only
Chapter 9: Upgrading the SVP software
Service Processor Technical Reference 177