Hitachi SVP F 00 Series - Page 178

Note: Befor
e upgrading the SVP software:
■
Disable the Hi-Track Remote Monitoring System (see
http://
hitrack.hds.com); otherwise, the upgr
ade procedure will fail. You can
enable Hi-Track after you upgrade the SVP software.
■
View all active alerts (see
https://support.hitachivantara.com/en_us/
contact-us.html).
Procedure
1. At the console PC connected to the physical SVP or running the SVP softwar
e, insert
the SVP software media.
2. On the SVP, create a new folder, and then copy all of the les from the SVP software
media into the new folder.
3. In the new folder, right-click the Setup.exe le and click Execute as
Administrator.
4. In the following screens, click Next, accept the license agreement, and click Next,
and then click Yes. If the Windows Security Alert window opens, click Allow
access. In the following screen, click the top option, as shown, and then click Finish.
The Envir
onmental Settings window opens as the system prepares for the
upgrade.
Upgrading the SVP software only
Chapter 9: Upgrading the SVP software
Service Processor Technical Reference 178