The following table shows the possible status conditions:
Status Description
Waiting Software waiting to be upgraded.
Software components are upgraded
individually.
In Progress Software is running.
Completed Software upgrade is complete.
Failed Software upgrade failed. Click Update
to display the Update Firmware
window and review the error details.
(Not Update) Not selected as a rmware upgrade
target.
11. In the Environmental Settings window, click Close.
12. In the Conrm exit window, click Conrm.
13. If you disabled the Hi-Track Remote Monitoring System, enable it (see http://
hitrack.hds.com).
Upgrading the SVP software only
Chapter 9: Upgrading the SVP software
Service Processor Technical Reference 181
To Next Page
Loading...
