Hitachi SVP F 00 Series - Page 217

The following TCP/IP port assignments are used by the storage system, other
de
vices, and applications.
Port number Usage description
80 Used by the SVP, Hitachi Storage Advisor, and Device
Manager - Stor
age Navigatorto communicate through
the HTTP protocol.
161 UDP (SNMP uses this port to send traps from the
storage system) .
427 Used by SMI-S.
1099 Used by Hitachi Command Suite products JAVA RMI
Registry server.
2000 TCP (Device Manager - Storage Navigator: Nonsecure)
Cisco Skinny Client Control Protocol (SCCP) uses port
2000 for TCP. If you use Device Manager - Storage
Navigator in a network with SCCP, change the TCP
port that Device Manager - Storage Navigator uses
(refer to the Device Manager - Storage Navigator
online help).
5989 Used by SMI-S.
10995 TCP Device Manager - Storage Navigator and Hitachi
suite components)
23015 Used for Web browser communications.
23016 Used for Web browser communications via SSL.
28355 TCP (Device Manager - Storage Navigator: Secure)
31001 Used for communication by Hitachi Command
Control Interface (CCI) data collection procedures.
34001 Used by RAID Manager.
51099 Used by Device Manager - Storage Navigator for
communication.
51100 Used by Device Manager - Storage Navigator for
communication.
■ The eective r
ange of the port number is 0 to 65535. Select a number that is not
already in use by another service.
■ Do not use port numbers from 1 to 1023 because they are reserved in other
applications. Instead, change the port numbers to 1024 or higher. However, the
port numbers of 2049, 4045, and 6000 cannot be used for MAPPWebServer and
MAPPWebServerHttps.
Changing SVP port numbers
Chapter 14: Changing and initializing SVP port numbers
Service Processor Technical Reference 217