d. Double-click r
estrictanonymous.
e. Set V
alue data to 1, verify Hexadecimal is selected, and then click OK.
2. Disable the beep when Remote Desktop Connection is connected:
a. In the Registry Editor window, navigate to HKEY_LOCAL_MACHINE\System
\CurrentControlSet\Control\Terminal Server.
b. In the Edit menu, click New > DWORD (32-bit) Value.
c. Type DisableBeep.
Conī “guring the Registry
Chapter 5: Installing the SVP software on a customer-supplied server
Service Processor Technical Reference 73
To Next Page
Loading...
