Hitachi UX2 - Page 103

Chapter 5 Creation and Setting of Print Messages
5-21
Chapter 5.
(5) [Adjust Inter-character space]
● An inter-character space can be set in units of characters using Adjust Inter-character space.
Select the character column to which you want to set an inter-character space using Start and End,
input the setting value in [Inter-char. space], check the print description, and press OK.
Screen for inter-character space adjustment
● When the inter-character space on the [Print format] screen is changed, the value set in units of
characters is changed to the same value.
● The display value of the inter-character space on the [Print format] screen indicates the inter-character
space of the first character.
End
OK
Start
Inter-char. space
You can select the setting target by
arrow buttons.