Hitachi UX2 - Other Messages; Yellow Ink Specific Messages

Chapter 12. When Warning or Fault Occurs
12-12
12.2.3. Other Messages
The following table describes messages related to settings and setups and their solutions.
Other message list
Message
No.
Message
Message description
Solution
C-187
Ink Temperature
Correction Notice
The ink temperature is set not to be
corrected.
● Contact your nearest local
distributor.
C-200
No Ink
Concentration
Control
The ink concentration is set not to be
corrected.
● Contact your nearest local
distributor.
C-201
Print Data/Settings
Notice
The print description or other setting
values may not be the latest. An
abnormal shutdown occurred in the last
operation.
● Check the print description or other
setting values.
C-209
Printer Startup
Failure
The printer startup failed.
● Contact your nearest local
distributor.
C-210
USB Memory Error
No USB memory is inserted. Otherwise,
a USB memory read/write error occurred.
● Insert the USB correctly.
● Replace it with new USB memory.
12.2.4. Yellow Ink Specific Messages
The following tables describe the yellow ink specific messages and their solutions.
Message
No.
Message
Message description
Solution
87
Ink reservoir change
announcement in
advance
The ink reservoir will need to be replaced
in a month.
● Contact your nearest local distributor
and replace the ink reservoir within a
month.
88
Ink reservoir replace
announcement
The ink reservoir needs to be replaced.
● Contact your nearest local distributor
and replace the ink reservoir.