Hitachi UX2 - 12.3. Checking Fault and Warning Occurrence Status

Chapter 12. When Warning or Fault Occurs
12-13
Chapter 12.
12.3. Checking Fault and Warning Occurrence Status
This section describes how to check the fault and warning occurrence status.
(1) Functions
● Allows you to view the occurrence time and description of a fault or warning message.
● Up to 480 messages are displayed.
● When there are 481 or more messages, they are cleared from the oldest first.
(2) Operation
Assume that the administrator is logged in to the system.
Press View alarm history on [Setting].
The [Fault/warning log] screen appears.