Hitachi UX2 - Operation to Exit from Setting Screen

Chapter 4. Basic Operation
4-9
Chapter 4.
4.1.5. Operation to Exit from Setting Screen
This section describes operation to exit from setting screen.
(1) Overview
● There are two types of setting screens as shown in the table below.
No.
Classification
Description
1
Screens with OK and Back
● When OK is pressed, new settings are confirmed, and the
display returns to the previous screen.
● When Back is pressed, new settings are canceled, and the
display returns to the previous screen.
2
Screens with Back
● When Back is pressed, the display returns to the previous
screen.
● When OK is pressed, an edited message to be printed or new settings configured on the [User
environment] setup screen are applied for printing.
● When HOME is pressed, new settings are confirmed, and the display returns to the [HOME] screen.
(2) Screen examples
(a) Screens with OK and Back
[Example of the [Date/time setup] screen]
Example of [Date/time setup] screen
OK
Back
HOME