Hitachi UX2 - Preface; Scope of application

i
Preface
Hitachi Inkjet IJ Printer (hereinafter referred to as the "unit") employs a non-contact, ink-jet method to print
onto a print target.
This instruction manual describes the basic operating procedures, maintenance procedures, and other
detailed handling procedures of the unit.
If the unit is improperly handled or maintained, it may not operate smoothly and may become defective or
cause an accident. It is therefore essential that you read this manual thoroughly to gain a complete
understanding of the printer and use it correctly.
After reading the instruction manual, properly keep it for future reference.
< Scope of application>
This instruction manual is prepared for all the models of "HITACHI IJ Printer Model UX2 for Dye Ink",
which are listed in the table below.
Please be advised that the differences among these models such as a nozzle size or applicable functions
are referred to in the relevant section in this instruction manual.
[HITACHI IJ Printer Model UX2 for Dye Ink]
Model type
Nozzle diameter
UX2-D160W
Standard model
UX2-D
65 μm