Hitachi UX2 - Operation of Screen Transition

Chapter 4. Basic Operation
4-5
Chapter 4.
4.1.3. Operation of Screen Transition
This section describes operation of screen transition.
(1) Overview
● Pressing menu buttons shown in the table below will take you to their corresponding screens.
Menu button list
Item
Description
Reference
HOME
(print description)
● Starts/stops the unit.
● Replaces the cartridge.
● Displays the print layout and operating information.
5.1.
Edit
● Edits messages.
5.2.
Select message
● Calls and prints saved messages.
5.3.
Save message
● Saves created messages.
5.5.
Setting
● Select the operation status, environment setup, maintenance,
etc.
Chapters 9. and 10.
(2) Screen transition procedure
[HOME] (print description) screen is displayed.
[HOME] (print description) screen
1
The items that allow screen transition or can
be pressed are displayed as "active".
Unselectable items are displayed as "inactive
(different darkness gray)".
2