Hitachi UX2 - Basic Operation to Change Settings

Chapter 4. Basic Operation
4-7
Chapter 4.
4.1.4. Basic Operation to Change Settings
This section describes how to change the setting values of the unit.
(1) Overview
● There are two types of setting items as shown in the table below.
Setting item list
No.
Classification
How to check setting values
How to change setting values
1
Inputting values
Values are displayed on the
screen.
Open the numeric key window by
pressing the value and input a
new value.
2
Selecting values
Setting values are displayed
on the screen.
Open the selection window by
pressing the setting value and
select one of the choices.
(2) Operation (The detailed setting screen that is displayed by selecting [Edit] is
used as an example.)
Setting item selection screen
(a) Inputting
values
(b) Selecting
values