Hitachi UX2 - Setting Dot Matrix, Inter-Character Space, and Other Parameters

Chapter 5. Creation and Setting of Print Messages
5-16
5.5.4. Setting Dot Matrix, Inter-character Space, and Other Parameters
This section describes settings of dot matrix, inter-character space, etc.
● Functions
– Sets the line spacing, dot matrix, inter-character space, bold font, and barcode.
Screen for setting dot matrix, inter-character space, etc.
(1) [Bold]
● Sets the character to bold.
● The available bold levels are "1 to 9".
(2) [Line spacing]
● Adjusts the spacing with the line above.
● This is set for each column.
● The available line spacing are "0 to 4".(5 or 6 lines : 0 to 2)
The colored print
item is the editing
target.
(4) Inter-character space
(3) Dot matrix
(1) Bold
(2) Line spacing
(5) Adjust Inter-character space