Hitachi UX2 - 3.4. Safe-Clean Station (Optional parts)

Chapter 3. Component Names and Functions
3-8
3.4. Safe-Clean Station (Optional parts)
The structure of the Cleaning station is as follows.
Left perspective view Right perspective view
Head cover rest
Place the print head
cover temporarily.
(It is available on both
left and right sides.)
Print head cable hanger
The print head cable can
be hooked on it.
Cleaning Solvent
Container
Bottle that collects
the liquid after
cleaning.
Print head inlet
An inlet for inserting the
printhead to be cleaned.
Cleaning
Umbilical cable
Contains wiring and
piping from the printer.
(Tube length: 4.5 m)
Slide block
Used to mount the
Cleaning station