Chapter 6. Character Print
6-6
● Set calendar conditions for each calendar block.
● Calendar characters cannot be input to the calendar block of a shift code or time count value.
Setting calendar conditions
(2) [Total Days]
● Use when setting the total number of days from the 1st of January for printing.
● Setting it as a total date character changes the print description according to the current total number of
days in linkage with the calendar time.
● Total days of normal and leap years are as shown in the table below.
● There is no zero-suppression function.
Total days of normal and leap years
(3) Three alphabet letters (JAN, FEB, ...)
● Use when printing month names in three alphabet letters (abbreviations).
● To print in any other character than alphabet, define it on the [Substitution rules] setup screen for three-
letter months.
● When three-letter months are mapped to a new substitution rule, the alphabets shown in the following
table are preset.
Month name notation in alphabets
To Next Page
Loading...
