Hitachi UX2 - Page 212

Chapter 8. Ink and Makeup Replenishment
8-6
Hold the IC tag mark of the label on the ink cartridge bottle over the RFID reader of the printer to read
the ink ID.
NOTE
● If there is ink remaining in the ink cartridge bottle even when the bottle is replaceable, do not
replace it but contact your nearest local distributor because some parts may be broken.
* If there is no reaction when you hold the cartridge bottle over the reader of the printer, the IC tag
mark of the cartridge may be damaged.
In this case, you can manually input the ink ID from the IJP screen.
(Steps -1 and -2)
● If the ink ID is read by the IJ printer, steps -1 and -2 are not necessary.
How to identify ink ID
2
2
2
2
2
RFID reader area
IC tag mark
30 mm or less