Hitachi UX2 - Page 216

Chapter 8. Ink and Makeup Replenishment
8-10
Set a new ink cartridge bottle in the specified position.
Install the boss of the ink cartridge bottle on the boss guide of the ink supply port.
How to install ink cartridge bottle
* If ink has accumulated on the pipe surface, wipe it off using wiping paper dampened with makeup.
[Note]
If a foreign object such as a screw is found or gets in the ink supply port, remove it.
5
Set a new ink cartridge bottle.
Ink side
Ink supply port
Boss guide
Align the boss with the guide.
Pipe
Boss
Be careful not to damage the
pipe surface.