Hitachi UX2 - Page 221

Chapter 8. Ink and Makeup Replenishment
8-15
Chapter 8.
Hold the IC tag mark of the label on the cartridge bottle over the RFID reader of the printer to read the
makeup ID.
NOTE
● If there is makeup remaining in the makeup cartridge bottle even when the bottle is
replaceable, do not replace it but contact your nearest local distributor.
* If a makeup cartridge bottle containing makeup less than half of the bottle is used, [Cartridge
replacement error] may appear on the screen. In that case, select the volume of the new makeup
cartridge bottle according to the guidance displayed on the screen.
* If there is no reaction when you hold the makeup cartridge bottle over the reader of the printer, the IC
tag mark of the makeup cartridge bottle may be damaged.
In this case, you can manually input the makeup ID from the IJP screen.
(Steps -1 and -2)
● If the makeup ID is read by the IJ printer, steps -1 and -2 are not necessary.
How to read makeup ID
2
2
2
2
2
IC tag mark
RFID reader area
30 mm or less