Hitachi UX2 - 9.6. Setting Communication Environment

Chapter 9. Environment Setup
9-18
9.6. Setting Communication Environment
This section describes how to set the communication environment.
(1) Functions
● Sets the communication environment setup values.
● Detail about communication setting, refer to Communication Manual.
Communication environment setup item list
Setting item
Description
Default
State at power-up
Sets whether to let the unit go online or offline at power-
up.
Comm. port is
OFF
Communication and signal error
Sets whether to cause a warning or fault when a
communication and signal error is detected.
Warn.
(2) Operation
Press Communication environment setup from the [Setting] menu.
The [Communication environment setup] screen appears.
[Communication environment setup] screen
Select the desired item to change it.
1
2