<<When performing head cleaning in [Standby] state>>
Operations from ink stop to head cleaning are automatically performed.
(1) The following confirmation message appears. Make sure that the print head is inserted into the
cleaning station, and press [OK].
[Shutdown Process + Head Cleaning Confirmation] screen
(2) If message appears, print head is not mounted correctly to head cleaning station. Please mount the
print head correctly. After that press start / continue.
[Stops Ink Ejection + Head Cleaning] screen
● To abort the operation, press the [Abort] button.
* If press Abort in progress, then No-cleaning stop sequence run. Please do not leave it that.
To Next Page
Loading...
