Hitachi UX2 - Page 280

Chapter 12. When Warning or Fault Occurs
12-4
(4) Fault/warning guidance
[Main Ink Tank Too Full] fault/warning guidance screen
When you press , the animation appears.
● According to the animation displayed, when Reset is pressed after the cause is removed, the fault state is
cleared, and the message is closed.
● When Close is pressed, the fault window is closed, but the fault state is not cleared. At this time, when
Fault is pressed in the status display area, the fault window appears again.
● However, when the unit is no longer in the fault state, you can clear the state by pressing Close.
Displays the guidance.