Hitachi UX2 - Unit specifications

Chapter 2. Specifications
2-2
The table below shows the specifications of the unit.
Unit specifications
Item
UX2-D160W
Nozzle size
65μm
Maximum print line number
Up to 6 lines
Number of print line
and print characters
(5x5, inter-character
space: 1 dot)
1 line
240 characters x 1 line (Upgrade option: 1,000 characters x 1 line)
2 lines
120 characters x 2 lines (Upgrade option: 500 characters x 2 line)
3 lines
80 characters x 3 lines (Upgrade option: 333 characters x 3 line)
4 lines
60 characters x 4 lines (Upgrade option: 250 characters x 4 line)
5 lines
48 characters x 5 lines (Upgrade option: 200 characters x 5 line)
6 lines
40 characters x 6 lines (Upgrade option: 166 characters x 6 line)
Font size (Horizontal
x Vertical),
line number
Standard printhead
(Maximum vertical
dots: 48 dots)
4x5
1 to 6 lines
5x5
1 to 6 lines
5x8 or 5x7
1 to 4 lines
9x8 or 9x7
1 to 4 lines
7x10
1 to 3 lines
11x11
1 to 2 lines
10x12
1 to 2 lines
12x16
1 to 2 lines
18x24
1 line
24x32
1 line
30x40
1 line
36x48
1 line
Character height
(Depending on print distance, print speed,
operating temperature)
Approx. 2 to 10mm
Display & input device
10.1" color TFT LCD touch panel (WSVGA)
Maximum print rate
(4x5, inter-character space 1 dot, 1 line,
76.9 kHz）
3,076 characters/sec
(Continue to next page)