Holip hlp-c+ - Wiring the HLP-C+ Inverter; Circuit Diagrams and Terminal Descriptions

- 12 -
HLP-C
+
Inverters
V. Wiring
⑴ Main Circuit Schematic Diagram
Power supply:
Verify that the inverter’s rated
voltage coincides with AC power supply voltage
to avoid a damage of the inverter.
No fuse breaker:
Refer to the related list.
Ground fault circuit interrupter
：
Use one of anti-high harmonic.
Magnetic contactor:
Note:
Do not use the magnetic contactor as the
power supply on/off button for the inverter.
AC reactor:
It is recommended to install a AC
reactor for power factor improvement if the
intput capacity is more than 1000KVA.
Inverter:
● Be sure to make correct connections of the
main circuit wires and control signal wires of
the inverter.
● Be sure to make correct setting of parameters
for the inverter.