- 40 -
HLP-C
+
Inverters
Note:
⑴
The frequency at each inflection point is determinded by
C000 and C035.
⑵
Skip Frequency is determined by C041.
⑶
Running Time is determined by Timer C042 and C043.
⑷
Restart after power off. The running status of frequency will
not be memorized.
4
：
Internal control Multi-speed
valid in the external control multi-speed. It is invalid in the
external control 4- speeds.
3: Disturbance (Traverse function)
This is a special parameter in the chemical fiber and printing
and dying industries to realize the traverse function. Except the
commands of stop, external faults and emergency stop all other
commands will not be accepted at running.
Note:
(1) Main speed and 7-speeds composes 8-speeds.
To Next Page
Loading...
