Holip hlp-c+ - C124 Rated Inverter Current; C125 Country; C126 Inverter Manufacture Date; C127 Manufacture Serial No.

- 78 -
HLP-C
+
Inverters
C124 Rated Inverter Current Factory Setting
：
*
Factory Setting. Depending on the model. It cann’t be changed.
It can be monitored, but not set.
C125 Country 50/60Hz
Set Range
：
0~1 Factory Setting
：
0
0
：
50Hz
1
：
60Hz
Specic setting according to the grid.
C126 Inverter manufacture date Factory Setting
：
****
Factory Setting. It can be
monitored, but not set.
Week
Month
Year
C127 Manufacture Serial No.

Factory Setting
：
*
Factory Setting. It can be monitored, but not set.
Through the manufacture serial number the manufavtury date,
nymber as well as the information aobut the inverter such as
the numbers of main circuit board and base plate, etc. can be
checked.
C128 Parameter Reset, Fault and Clear-up
Set Range
：
0~12 Unit
：１
Factory Setting
：０
0
：
Software Version No. 1~4
：
Fault record
6
：
Fault clear up 8
：
Restore factory settings
10
：
Input frequency at fault 11
：
Input current at fault
12
：
Bus voltage at fault
Through C128 the software version no., fault record can be
checked. In case of no fault record Display 1 will appear. Enter
into the parameter and set it to 0~4 so as to check fault record.
Through the setting of C128 the fault record can be cleared