- 2 -
HLP-C
+
Inverters
● Do not check components and signals on the circuit boards.
● Do not dissemble or modify the any internal connecting
cord, wiring or component of the inverter by yourself.
● Be sure to make correct ground connection of the earth
terminal of the inverter.
● Neve r re model it or excha nge c ont rol boa rd s a nd
components by yourself. It may expose you to an electrical
shock or explosion, etc.
Caution
● Do not make any voltage withstanding test with any
component inside the inverter. These semi-conductor parts
are subject to the damange of high voltage.
● Never connect the AC main circuit power supply to output
terminals U.V W. of the inverter.
● The main electric circuit boards of CMOS and IC of the
inverter are subject to the effect and damage of static
electricity. Donn’t touch the main circuit boards.
● Installation, testing and maintenance must be performed by
qualied professional personnel.
● The inverter should be discarded as industrial waste. Avoid
burning.
( 1 ) Checks upon Delivery
The inverter has been strictly and well packed before ex-work.
In consideration of various factors during the transportation
special attention should be paid to the following points before
the assembly and installation. If there is anything abnormal
please notify the dealer or the relevant people of our company.
● Check if the inverter has got any damage or deformation
during the transportation.
● Check if there is one piece of HLP-C
+
series inverter and one
copy of the instruction manual available after unpacking it.
● Check the infor mation on the nameplate to see if the
specifications meet your order (Operating voltage and KAV
value).
To Next Page
Loading...
