Holip hlp-c+ - Description of up and down Function

- 51 -
HLP-C
+
Inverters
⑷
When all High, intermediate and low speed has signal input it
will give priority in the sequence of high, intermediate and low
speed.
Note:
⑴
When C41 is not set to 0 it has such disturbance function. Its
disturbance amplitude is determined by C41.
⑵
Its down time of disturbance is set by C43, while its up time
is set by C42.
E. Description of UP and DOWN Function
UP DOWN Result
ON OFF Frequency up
OFF ON Frequency down
ON ON No up, no down