Selenia User Guide
Chapter 6—The User Interface
72 MAN-03270 Revision 003
To Edit Outputs:
1. Select Edit > Outputs.
2. Select an Output name. If the Output keeps its current name, go to step 7.
3. Select the Copy button.
4. Enter a new Output name.
5. Select the OK button.
6. Select the new name in the Edit Outputs dialog box.
7. Select the Edit button.
8. Select the tab for the type of device to add.
9. Select the device to add.
10. Select the Add button to move it to the right column.
11. Select the name of any output in the Devices currently selected column that is not
needed in the group.
12. Select the Remove Item button.
13. Select the Accept button.
14. Select the OK button.
To Next Page
Loading...
