Selenia User Guide
Chapter 6—The User Interface
78 MAN-03270 Revision 003
6.2.8.2.7 The Repreview Option
1. Select the thumbnail image to review.
2. Select the Repreview tab, then select the Repreview button.
3. When you finish reviewing, select the Cancel button.
4. To create a new file to resend, make any required changes to the markers, comments,
or use the Edit View function, then click Save. If you select a FOR PRESENTATION
image, you cannot change the markers and ROI is not enabled.
5. Make any necessary changes in the Contrast or Density. These changes do not save
when you save the image.
6. Select the Save button.
Note
Make sure that you send the newly-saved image. The
original is a possible selection.
6.2.8.2.8 Retrieve Priors
To find the Images in the Local Database, select the Local Exams tab and search for the
Patient.
To Retrieve Priors from the PACS system:
1. Select Admin > Retrieve Priors.
2. Enter the patient name in the Name field or ID in the ID field (wildcards allowed).
3. To limit the results to a date range, select the checkbox Search by Date Range, then
enter the Date Range for the Prior Images. The date format must match the
configuration setting, (mm/dd/yyyy or dd/mm/yyyy).
4. Select the Query button or press the Enter key. If the button is not enabled, you need
more characters in either the Name field or ID field.
5. Select the patient name (or names) to import.
• You can select many patients.
• You can deselect patients.
• You can use the title bars to sort by field.
6. When the Import button activates, select Retrieve and Import. The images import
into the Acquisition Workstation Local Database.
7. Select the OK button.
8. Select the Close button.
After the import completes, select the Local Exams tab to display the Patient Images. If
there are more than 50 records in your query request results, adjust your search.
6.2.8.2.9 MPPS Status
When this optional feature is installed, a menu item is added to sites with the MPPS
Service Class Provider. Workflow changes with three Close Procedure options instead of
one option.
To Next Page
Loading...
