6. Programming
6.2. Configuring A/D module through program method
R200 Analog Input Module 2MLF-AV8A, AC8A User's Guide 111
September 2010 Honeywell
2. This program example shows the procedure to configure the A/D voltage to digital
conversion module by program method. That is, using PUT/GET commands to
transfer data between CPU and module internal memory.
2MLF-AC8A
This program example shows the procedure to configure the A/D current to digital
conversion module by program method. That is, using PUT/GET commands to transfer
data between CPU and module internal memory.
To Next Page
Loading...
Need help?
General
