Honeywell 2MLF-AV8A - 4 Operating Procedures and Monitoring; Operating Procedures; Figure 9 - Operating Procedure

R200 Analog Input Module 2MLF-AV8A, AC8A User's Guide 53
September 2010 Honeywell
4. Operating Procedures and Monitoring
4.1 Operating procedures
The following flowchart illustrates the procedure to initialize the operation of the Analog
Input Module.
Start
Install A/D conversion module on the slot
Connect A/D conversion module with the
external device
Will you specify Run
parameters through [I/O
parameters] setting?
Specify Run parameters through [I/O
parameters] setting
Prepare PLC program
YES
NO
End
Figure 9 – Operating procedure