3. Installation and wiring
3.1. Installation
48 Analog Input Module 2MLF-AV8A, AC8A User's Guide R200
Honeywell September 2010
Handling precautions
The following precautions must be taken when unpacking and installing the Analog Input
Module.
1. Do not drop the module, and avoid any strong or sudden shocks.
2. Do not remove the PCB from its case. It can result in damage or an abnormal
operation.
3. Do not install or remove the module to/from the base when the power supply is
turned on.
To Next Page
Loading...
Need help?
General
