Honeywell 2MLF-AV8A - PUT Instruction

5. Configuration and Function of Internal Memory
5.5. PUT/GET function block use area (parameter area)
R200 Analog Input Module 2MLF-AV8A, AC8A User's Guide 91
September 2010 Honeywell
Global Variable Contents Read/Write Instruction
_Fab_AVG_SEL
Average processing
method setting
Read/Write
_Fab_CH0_AVG_VAL
CH0 average value
setting
Read/Write
_Fab_CH1_AVG_VAL
CH1 average value
setting
_Fab_CH2_AVG_VAL
CH2 average value
setting
_Fab_CH3_AVG_VAL
CH3 average value
setting
_Fab_CH4_AVG_VAL
CH4 average value
setting
_Fab_CH5_AVG_VAL CH5 average value
_Fab_CH6_AVG_VAL
CH6 average value
setting
_Fab_CH7_AVG_VAL
CH7 average value
setting
_Fab_ERR_CODE Error codes Read/Write GET
At device allocation, ‘a’ means base number and ‘b’ means slot number where module is
equipped.
PUT instruction
Using PUT instruction, write data to special module.
*ANY: WORD, DWORD, INT, USINT, DINT, UDINT type available among ANY type