Galaxy Dimension Installer Manual
6-37
42 - Codes (cont’d)
the door on its own; it needs another PIN or card as well (see option 42 = Codes for programming).
10 = APB Forgive
This function, if selected, clears all antipassback restrictions for the selected user.
11 = Template
Every user on the system must be allocated an access template. Multiple users can be assigned the same
template. An access template is a list of groups and time schedules that will govern card access through
doors. This method means that if there are multiple doors leading into one group or area, then a user will be
given access to all those doors in one move. This reduces programming time and complexity. The templates
are created in option 45.7 which are in turn made up from the weekly schedules created in option 65.1.
42.2 = PIN Warning
This option determines the number of days notification before the PIN Change expiry date (refer to option
51.42 = PARAMETERS.PIN Change) that the user is prompted to assign new code on entry of the expir-
ing PIN. The default period is 28 days, with a programmable range of 1 – 28. If the user does not assign a
new code by the end of the PIN Warning period, then the code is erased on the next unsetting of the system.
NOTE: The PIN Warning ends on the last day of the month, the PIN expires on the first day of the follow-
ing month.
42.3 = Card Users
This option determines the tags/cards on the system for various users. There are seven options:
1 = Add Batch
This option starts enrolment and displays the user/tag for each presentation. When batch enrolling (auto
assigning of tags to users), the panel increments the user number, starting from Batch Start. It does this for
every new tag presented at the DCM assigned in Batch DCM.
2 = Test Batch
This option checks the tag number stored at the panel for the current tag presented at the Batch DCM. It can
also be used to go directly to the user programming details that are assigned to the presented tag.
3 = Delete Batch
This option removes card numbers from enrolment. A warning is given before deletion.
4 = Batch Start
This option determines the user number where enrolment starts.
5 = Batch End
This option determines the user number where enrolment ends.
6 = Batch DCM Rdr
This option determines the DCM reader used for enrolment. Pressing the * key returns the system to the
default of any reader.
7 = Template User
This option chooses a user to be a template whose access authority and non-unique attributes are applied to
other users on the system when using the 1 = Add Batch function.
To Next Page
Loading...
Need help?
General
